-40%

MIG-160 Welder 160A IGBT Inverter ARC STICK GAS GASLESS LIFT TIG 5 IN 1 Welding

$ 140.44

Availability: 19 in stock
  • Duty-cycle: 85%
  • Input power voltage: AC220±15%V
  • Power factor: 0.93cosφ
  • Package Dimensions: 21.26 x 13.66 x 12.36 inches
  • Special Features: LIFT TIG
  • Welded Material: Stainless steel/Carbon Steel/Mild Steel/Other Meta
  • MPN: Does Not Apply
  • Features: Gasless
  • Item must be returned within: 30 Days
  • Weight: 27 pounds
  • Diameter of wire: 0.8/1.0mm (.030"-)
  • Output voltage range: 15-22V
  • Welding Process: Flux Core/Solid wire/Gas/Gasless/STICK/LIFT TIG
  • Bundle Description: 1pcs 2m cable +Earth clamp1pcs 2m cable+ electrode holder1pcs 3m Mig welding torch1pcs Flux cored wire 1kg without gas weld1pcs 3m Welding gas hose
  • USA WAREHOUSE: KY,NJ,CA,TX
  • Input current: 22A
  • Applicable Regions: Suit For US , CA and Other Countries
  • Welding thickness: ≥0.8mm (.030")
  • Custom Bundle: Yes
  • Insulation class: F
  • Rated output voltage: 22V
  • Restocking Fee: No
  • Rated output current: 160A
  • Return shipping will be paid by: Buyer
  • Refund will be given as: Money back or replacement (buyer's choice)
  • Brand: REBOOT-US
  • Country/Region of Manufacture: China
  • Item Type: MIG Welder/MMA/STICK /LIFT TIG
  • Rated input power capacity: 4.8KVA
  • Voltage: 220 V
  • Plug Format: N6-50
  • Non-Domestic Product: Yes
  • Condition: New
  • Efficien: 85%
  • Protection class: IP21S
  • Output current range: 30-160A
  • All returns accepted: Returns Accepted
  • Feed: Automatic Feed
  • Parameter: MIG/MMA/lift TIG MIG1600 5 in 1 welder

    Description

    ✔ARC ✔STICK ✔MIG GAS ✔MIG GASLESS ✔LIFT TIG 5 IN 1 Welding machine

    ARC

    STICK

    MIG GAS

    MIG GASLESS

    LIFT TIG 5 IN 1 Welding machine
    【5 IN 1 WELDER】- The MIG welder has MIG MMA TIG modes. With this multifunctional welder, you will be able to save your time and money when it comes to different welding needs.
    【EASY TO USE】- Using high quality Integrated wire feeder to ensure smooth wire feed, adjustable welding voltage, and current. The full-size MIG platform, ensuring long-time welding, go with smooth average speed and powerful large motor.
    【PORTABLE DESIGN】- Lightweight and compact design. It comes with a comfortable handgrip, making it easy for you to carry anywhere you want.
    【WIDELY USED】- It is for welding normal thin steel and iron, perfect for home DIY and general repairing work. Used for professional welders and welding hobbyists.
    eMulti-mode of mig/mma/lift tig,just select the mode you need on the panel
    This digital mig160 welder supports 2lbs/10lbs flux cored wire most perfectly to do the carbon steel welding without gas.rated duty cycle : 60% at 160a and 100% at 120a.Just select the correct parameters instead of setting from the panel. 【30A breaker suggested】
    Using gas with 2lbs/10lbs solid welding wires .030"-.035”(0.8/1.0 mm )to weld .030"above thickness workpiece.
    Lift tig mode(not HF tig) is optional
    (need to buy extra tig torch,tig torch NOT included in this package).
    Great gift for DIY users,maintenance and repair and metal fabrication. energy conservation and environment protection to compare with transformer welders. home use ,switching frequency is beyond audio range, which almost eliminates noise pollution
    Buy with confidence as reboot offer 30-day 100% satisfaction and consumables gift guarantee and 3-year limited warranty.Click on the buy it now button !
    Buy directly from the manufacturer and benefit from our exclusive advantages!
    3 year guaranteen on welding machines, plasma cutters & filter cassettes, telephone advice, technical support and service even outside the guarantee period.
    Spare parts delivery guaranteed for 5 years.
    In-house workshop and repair service
    High quality and 100% compatible accessories.
    Over 100,000 satisfied customers in united states, Canada the European Union and Switzerland.
    Trial welding, trial cutting. We would be happy to invite you to test the devices here on site. Our customer service is looking forward to your visit.
    Visit us soon at various international trade fairs.
    TIG torch and MIG torch
    (not include tig torch,need to buy)
    17FV TIG TORCH (NOT Include)
    TIG17FV with 10-25/35-50 Plug, Air cooled with valve; Rating:150A DC,120A AC; Duty cycle for 35%; electrodes: 0.5-2.4MM
    With 5/8-18 UNF Gas Power Hose Connector and 2 Pins female air socket, fit various models Incorporated Type tig welders with the same size connector.
    Rated 150Amps, can weld with 0.04"-1/8" tungsten electrodes
    Standard Length: 13 Feet 4M Cable
    MB15 MIG TORCH
    This pt31 plasma cutter torch can work with ESAB/L-TEC PT-31, JG-40 and WSD-LG40, is available for Plasma cutting machines such as CUT-40, CUT-40D,LGK-40, CT312,CT312D,CT416,CT416D,CT518, CT518D, Super160, Super160P etc.
    HF Ignition, easy to start the arc
    Standard Length: 4M
    Post Flow: 40sec.
    Recommended Ignition: HF
    Gas Flow:150LPM
    Gas Pressure: 4.5-5.0
    Bar Gas: Air Duty Cycle: 60% Current: 30 Amp
    Standard Length: 16 Feet 5M Cable
    Included consumables, one set of consumables (1 nozzle, 1 electrode, 1 ring, 1 cup) installed on the torch head.
    tTechnical specifications
    TYPE
    RBM1600
    Input power voltage (V)
    1phase220V,50/60Hz
    Rated input current (A)
    24.5
    Rated power capacity (KVA)
    3.2
    Current adjustment range (A)
    MIG:30-160 MMA:30-140
    Welding thickness (mm)
    >1.0
    Voltage adjustment range (V)
    15-23
    No-load voltage (V)
    55±5
    Electrode diameter (mm)
    0.8/1.0
    Rated duty cycle
    60%
    Efficiency (%)
    V
    Power factor
    0.7
    Protection class
    IP21S
    Insulation class
    F
    Size (mm)
    540*310*350
    Weight (Kg)
    12
    Use a metal brush or grinder and clean down to bare metal before striking an arc.
    A fillet weld, shown here, is one of the most common types of welds. In the flat position, keep the gun angled at 45 degrees from each piece.
    Whether you weld vertical up or down will depend on the application and the thickness of the material you are welding.
    You'll want to direct more heat into the bottom piece of metal when welding a lap joint. A 60 to 70 degree angle is usually best.
    mpackage contents:
    (NO TIG TORCH)
    ✔1pcs Power source Mig welder Mig160
    ✔1pcs 2m cable +Earth clamp
    ✔1pcs 2m cable+ electrode holder
    ✔1pcs 3m MB15 Mig welding torch
    ✔1pcs Flux cored wire 1kg without gas weld
    ✔1pcs 3m Welding gas hose
    if you need Operation Manual,pls contact me !!
    Overseas warehouse:
    Payment
    Delivery details
    Terms of sales
    About us
    Contact us
    Payment
    1. We can ONLY accept PayPal payments.
    All major credit cards are accepted through the secure payment processor PayPal.
    2. Payment must be received 7 days after the auction ends.
    Unpaid disputes are filed on eBay for non-payable buyers.
    3. Import duties, taxes and charges are not included in the item price or shipping cost.
    These charges are the buyer's responsibility.
    4. Remote areas need to pay additional shipping.
    Delivery details
    1. Shipping cost: Click the shipping and payment tab on the product detail page to see the delivery details.
    You can calculate the shipping cost by entering the required information.
    2. Transit time: The transit time varies depending on the shipping method.
    3. Item Processing Time: The processing time for a specific order depends on the product type and stock status.
    Mostly, processing time can be 2 working days.
    Terms of sales
    1.60 days  free store warranty:
    All our product offer 60 days free warranty time,during this period,if our item got quality problem.We will exchange or replace item for customers without any fee.
    2. 3 years store warranty:
    All our product got 1 year store warranty,after 60 days free store warranty.During this time,if our item got quality problem,we can offer exchange or repair.But buyer need to pay the ship back fee when we pay the re-ship fee.
    3. 1 week Return:
    All our item offer 7 days return peroid,defective or non-defective. Return must include all original package and accesorries, item must in good condition.
    Defective item: customers first pay the shipping fee and ship back the item, we check and confirm, then we will offer full refund and the ship back fee.
    Non-defective item: 7 days Unconditional return, buyer need to pay the ship back fee, and we will offer refund your payment, but not include shipping fee.
    4. Please do contact us first by ebay message before any return or case.
    About us
    *
    Full Digital Control System
    S
    mart Design with full digital control ,Constant voltage and synergic
    adjustment control.
    *
    Production Control System
    F
    ully implement the ISO9001:2008 quality management system.
    *
    100% Quality Control Test
    Each Machine with 100% QC Test , Life Test and Welding Function Test.
    *
    Factory Management Control
    Over 10 years factory control system focus on the welding field.
    Contact us
    1.Please be patient when contacting us, all messages will be replied within 24 hours.
    2.Please let us know immediately if a package is damaged upon arrival.
    3.Feel free to contact us if you’d like to combine shipping on your purchases.
    4.We appreciate your positive five stars feedback and we will send buyers positive feedback after a shipment has been processed.
    5.Customer satisfaction is significant to us. If you are dissatisfied with a transaction for any reason. Before taking any action, please contact us through eBay and we will do everything we can to help you.
    On May-11-21 at 20:57:10 PDT, seller added the following information: