Miller Millermatic 141 MIG Welder with Cart 951601

Description

Miller Millermatic 141 MIG Welder with Cart  951601.
Additional shipping charges that is with in US territories.
Welds 24 gauge - 3/16 in. (0.8-4.8mm) mild steel. Uses 120V power.
WHAT'S INCLUDED
Millermatic 141
Hook-and-loop cord wraps
6.5-ft. (2 m) power cord with plug
Small running gear/cylinder rack
10-ft. (3 m) MDX™-100 MIG Welding Gun
10-ft. (3 m) work cable with clamp
Argon and AR/CO2 mix flow gauge regulator with gas hose
Hobart® spool of .030-in. (0.8 mm) solid wire
Two contact tips for .030-in. (0.8 mm) wire
Material thickness gauge (#229 895)
Quick Select™ drive rolls for .024-in. (0.6 mm) or .030/.035-in. (0.8/0.9 mm) solid wire, and .030/.035-in. (0.8/0.9 mm) flux-cored wire
Auto-Set™
A breakthrough control that automatically sets your welder to the proper  parameters.  Auto-Set offers all-in-one MIG minus the hassle of finding parameters.  Simply set the wire diameter, set the material thickness, and start welding!
120V Input Power
Uses 120V household input power so there is no special power requirements.  Flexible to use in any location!
Manual Mode
Gives you the flexibility to manually set the machine when welding aluminum, stainless steel or anytime you want to set your own parameters on mild steel.
Smooth-Start™
This technology provides a smooth, spatter-free start.  The best starting machine in the 120V MIG category!  No more pop-gun starts or spatter to clean up.
GENERAL SPECIFICATIONS
Title
Millermatic® 141 MIG Welder with Running Gear/Cylinder Rack
Industries Interests
Racing / Customizing / Restoring
DIY / Home Hobbyist
Farm and Ranch
Metal Art / Sculptures
Manufacturing
Material Thickness
Mild Steel 24 ga (0.8 mm0 - 3/16 in. (4.8 mm)
Aluminum 18 ga (1.2 mm) - 14 ga (1.9 mm)
Weldable Metals
Aluminum
Input Voltage
110/115/120 V
Input Phase
1-Phase
Input Hz
60 Hz
Input Amperage
20 A
Current Type
DC
Rated Output
90 Amps at 18.5 VDC, 20% duty cycle
Max Open Circuit Voltage
30 VDC
Wire Feed Speed
IPM Range 15 IPM - 360 IPM
MMin Range 0.4 m/min - 9.1 m/min
Wire Diameter
Solid Steel 0.024 in - 0.03 in
Stainless Steel 0.024 in - 0.9 mm
Flux Cored 0.03 in - 0.035 in
Solid Steel 0.6 mm - 0.8 mm
Stainless Steel 0.6 mm - 0.8 mm
Flux Cored 0.8 mm
Portability
Handle(s)
Running Gear / Cart (Standard)
Weld Output
CV
Net Width
11.25 in
Net Height
12.5 in
Net Length
20.5 in
Net Weight
51 lbs
Warranty
3 Years
Miller's True Blue Warranty
Angled All Aluminum Drive System
Robust wire drive with Quick Select™ drive roll and calibrated tension knob creates consistant feeding and easy setup for up to 15-foot MIG guns.
Auto Spool Gun Detect™
Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.
Quick Select™ Drive Roll
Makes setup quicker by offering three grooves - two for different size solid wire and a third for flux-cored wire.
Thermal Overload & 'Tip Saver' Short Circuit Protection
Shuts down the unit and activates the over-temperature light if the airflow is blocked or duty cycle is exceeded.  Tip Saver shuts down output when the tip is shorted to the work extending tip life and protecting internal components from damage.