Rinnai RU160iP Tankless Water Heater REU N2530FF 160,000 BTU 8-GPM

Description

Rinnai Tankless Water Heater  RU160iP  REU N2530FF 160,000 BTU 8-GPM  18.5”x 26.4” x 10.9”
Unit Powers On….See pictures.
No past error codes or maintenance codes come up on unit when tested.
This unit can be converted from LP Gas to Natural Gas by a Professional Licensed Installer.
With an enhanced combustion design, the Rinnai SENSEI Tankless Water Heater provides a better experience for both users and installers. Like all Rinnai Tankless Water Heaters, it's also vertically integrated. That means all key components are manufactured by Rinnai — to ensure Rinnai quality.
Condensing Technology for Colder Climates
The Rinnai SENSEI offers freeze protection down to -4° F (for outdoor units) or -22° F (for indoor units) through:

NEW integrated check valve that prevents backflow from outside cold air

NEW Fiber Mesh Premix Burner

Integrated logic to temporarily activate the unit in extreme cold climates
Specifications:
Max. BtuH Input: 160,000
Min. BtuH Input: 15,000
ENERGY STAR® Qualified
Gas type: Propane Gas
Wifi Capable
Includes service valve kit
·
Product Type:
Tankless Heater
·
Installation Type:
Indoor Only
·
Fuel Type:
Propane
·
Energy Factor:
0.92
·
Energy Star Rated:
Yes
·
BTU Input:
160000
·
Flow Range (GPM):
0.26 - 8.0
·
Temperature Range (F):
98°F to 140°F
·
Height (Inches):
26.4"
·
Depth (Inches):
11-1/2"
·
Width (Inches):
18-1/2"
·
Weight:
62 LBS
NOTE:  There are some minor scuff marks on cover and minor dent.
There may be small dents and or scratches or blemishes not seen in pictures.
NOTE:
The unit may be shipped in a different box other than its original box.
NOTE:
ISOLATION VALVES and Pressure Relief Valve are included.
NOTE:
Unit
must be installed by a licensed professional  installer
for these types of units.  If for some reason there are problems with the unit, then the professional installer would be able to identify the problem and resolve.  I will not accept returns if the unit was not installed by a professional installer and/or problem(s) identified were not attempted to be corrected by a professional installer.
NOTE:
If the unit must be returned, then Before a returned unit will be accepted, I would need the licensed professional installers name and phone number so as to contact them to ensure that a problem cannot be resolved before returning the unit and that in fact the installer is a licensed installer for these types of units
.
Thank-You for your understanding of the NOTES above.