Titanium Water Heater Anode Rod by American #100305721 w/ 120v control module

Description

PERMANENTLY ELIMINATE ALUMINUM HYDROXIDE AND MOST SMELLY WATER AND HELP EXTEND THE LIFE OF YOUR WATER HEATER TANK. POWERED ANODE SYSTEM The Product Preservers™ Powered Anode System replaces sacrificial anodes which are normally shipped with water heaters.
Product Preservers 100305721 Powered Anode System
Features
* Built-in LED fault light and audible alarm for system notifications
* Easy installation with a standard 120 volt wall outlet
* Eliminates smelly water issues and aluminum hydroxide caused by sacrificial anodes
* Protects for years with no maintenance required
* Simple installation
* Great for soft water applications
* Excellent option for upgrading most new and existing electric or gas water heaters up to 50 gallons and less than 10 years old
* Patented adaptive technology quickly adjusts to the local water conditions
* Continual responsive protection as long as continual power supplied
* Eliminates smelly water issues caused by sacrificial magnesium anodes
* Great for well water in hard water areas
Powered Anode Rod System 100305721 for A.O. Smith, Reliance, State, American, Whirlpool, and Craftmaster Branded Hot Water Heaters Up to 50 gallons
Description
The Powered Anode System has exclusive technology that can sense water conditions and provide the proper level of corrosion protection. In some areas, sulfates in the water react with the anode in the water heater to create hydrogen sulfide which gives hot water a rotten egg or sulfur like smell. The Powered Anode System eliminates the reaction and solves most smelly water issues. KIT COMPONENTS Control Module with two self-tapping screws Anode (electrode) Power Supply (Input 120 VAC/Output to module: 12 VDC) Wiring Harness Kit 100305721 ENVIRONMENTAL SPECIFICATIONS Humidity up to 95% non- condensing. Temperature, operational = 4⁰F to 158⁰F (-20⁰C to 70⁰C) Temperature, storage = -40⁰F to 176⁰F (-40⁰C to 80⁰C) Vibration = 0.5G
Features:
The Product Preservers Powered Anode System uses patented adaptive technology that quickly adjusts to your water type providing the precise amount of current needed to deliver the best protection for your water heater tank
Consistent protection is paramount in maintaining the integrity of the steel water heater tank. Built-in LED fault light and audible alarm provides peace of mind knowing the system is working properly
Installation is made easy for professionals with a small control box that can plug into any standard 120 volt wall outlet
Eliminates smelly water issues caused by sacrificial magnesium anodes
Great for softened water applications
Product Details:
Item Weight: 1.5 pounds
Package Dimensions: 23 x 4.2 x 2.2 inches
Voltage: 120 volts
Batteries Included?: No
Batteries Required?: No
Shipping Weight: 1.5 pounds
KIT COMPONENTS
* Control Module with two self-tapping screws
* Anode (electrode)
* Power Supply (Input 120 VAC/Output to module: 12 VDC)
* Wiring Harness
In areas with sulfides in the water, there is a reaction with magnesium anodes which creates hydrogen sulfide gas that produces a rotten egg smell in the water. Smelly water conditions typically occur in private wells located within the high hardness areas shown in the water map below. In other areas with high conductivity water, aluminum anodes create an aluminum hydroxide gel that decreases the efficiency of the heater and quickly depletes the anode leaving the tank unprotected. This next generation of anode provides consistent protection that extends the life of your water heater tank. Since no chemicals are added to the water as with sacrificial anodes, the Powered Anode System will not create smelly water or aluminum hydroxide.