Torque Converter 1" 30 series #35, Replaces Comet 218354 TAV2 Go Kart Mini Bike

Description

Torque Converter for #35 Chain, 1" Bore (TAV2 Replacement)
This asymmetric torque converter design has been very popular the past 30 yrs, and has been used on many different brands of 5 - 9 HP small engines, go-karts, and mini bikes.
This torque converter is an asymmetrical inline small engine clutch that will help you get more power out of your small engine by reducing engine load. A torque converter acts similar to a transmission, allows higher speeds out of your small engine, and smoother acceleration.
Engagement range is approximately
2350 RPM
; however, this can be adjusted from Minimum 1200 RPM - Maximum 3100 RPM by changing out springs (not included) and other adjustments.
Our torque converter fits a 1" shaft and comes with a
12 tooth sprocket
for a
35 chain
. It will work with small engines producing
5.5 HP - 9 HP
.
Engine compatibility:
It is compatible on
most
small engines with horizontal shaft.
Briggs
Robin
Tecumseh
Honda (and clones)... Kit may need to be altered to work with some 9HP & GX270 engines.
Kohler
Clinton
Lifan
This unit replaces:
Comet 218354A Torq-A-Verter
Specifications:
Driven unit: Diameter 157mm
Drive clutch bore: 25mm (1")
Belt: Asymmetrical type
Top width: 19mm(3/4")
Sprocket teeth: 12 teeth
Engagement range: 2350?200 RPM
Recommended engine: 5.5HP - 9HP engine, 1" shaft with flat key
Bolt Pattern to Mount to Engine:  (4) 5/16" holes on a 3-5/8" bolt circle, and (4) 5/16" holes on a 5" bolt circle.
Assembly Includes:
Driver Unit: 1 set
Driven Unit: 1 set
V-Belt: 1 pc
Driven Shaft & Gear: 1 set
Side Retainer Plate: 1 pc
Torque Converter Cover: 1 pc
Pilot Washer has a 5/16" bore, may need to be drilled out to 3/8" to work with some 1" crankshafts.
Part Number: 473535
Check out our other items.
Buy In Bulk.
We have tons of parts available!
Local Pickup Address:
BMI Karts & Parts
769 E. Main St.
Versailles, OH 45380
Powered by SixBit's eCommerce Solution